Q: how much would it cost to fix water pump and replacements of the following: timing belt, drive belts (2 pcs), 3 seals, tensioners,

That is a pretty common failure on the 4.0 engine. Random stalling, long crank, rough idle, or the engine failing to start are all symptoms. Usually a code is stored, but this is not always the case. If you would...

10,000 euros is around 12,000 US dollars. I would say get yourself a good used Toyota (https://www.yourmechanic.com/article/how-to-buy-a-used-car). Those things can run forever and they are really made well. I know they make a lot of Toyotas (https://www.yourmechanic.com/scheduled-maintenance/toyota-corolla) in Europe, too....

It should have a sticker under the hood stating the amount of R134a to be 1.35lbs or .6kg. You should put about 1 oz of A/C oil in the condenser and the compressor should have the amount it needs on...

When you install new parts, there could be some initial smoke or unusual vapors as factory coatings burn off, so the first thing you want to do is make sure that this is not a transient issue or false alarm....

I would recommend looking at either hose to determine which hose the leak is coming from with the car running as this will pressurize the system and force water to the leaking point. Consider scheduling an appointment with one of...

Hi - If you spin the fan and can hear a noise, that is an indication that the water pump bearing is failing. It would be best to replace the water pump (https://www.yourmechanic.com/services/water-pump-replacement) as soon as possible so it doesn't...

Hi there. Let me offer option #4 - cold start injector. The cold start injector (https://www.yourmechanic.com/services/cold-start-injector-replacement) is also known as the cold start valve. The part is located on the cold air intake, which is found on the intake manifold....

If the engine Revs up, but the car does not accelerate, then your transmission must be slipping. You can check the fluid level in the transmission and add some if it is low, but even if this solves your problem,...

The first thing to do is to scan the computer systems to get the codes stored for the traction light being on. The noise may be coming from the sway bar links or the struts are worn and will make...