Q: How much to replace with regular shocks

Hello, the first thing to check on any car that has a transmission dipstick is to check the transmission level (https://www.yourmechanic.com/services/transmission-fluid-is-leaking-inspection). If the transmission level is too low, the transmission won't engage in any gear. In a situation like this,...

Hi. This might be due to the theft deterrent system being activated. The key for you vehicle has a coded chip that is programmed to your ignition switch. If the switch fails to recognize it, it will think you are...

Hi there. Your smog check is measured as to how efficiently your vehicle is burning fuel and air. Smog is reliant on many different components. Your EGR valve, vacuum, and also your catalytic converter are factored potential factors. I would...

Seeing your Ford Taurus’ temperature gauge in the red zone is an immediate reason for concern. Since this is indicative of your engine overheating, your Ford’s cooling system will need to be thoroughly inspected to determine the cause behind the...

From what you are describing it is possible the catalytic converters might need to be replaced. Before replacing them a back-pressure test should be preformed to verify that they are in fact faulty. After replacement, a verification that your engine...

The bearing will have to be replaced. I recommend having a reputable transmission handle this repair. I also suggest having the clutch and pressure plate replaced while they are in there. 

Hi, thanks for writing in. I'd be happy to provide you some insight on these trouble codes. Code P0025 (https://www.yourmechanic.com/article/p0025-obd-ii-trouble-code-camshaft-position-b-timing-over-retarded-bank-2-by-jay-safford) relates to the camshaft position sensor detecting that exhaust camshaft is in an incorrect position. This affects ignition timing which...

You can use a mild polish like a toothpaste that will clean the glass without scratching the glass. Use it with small circular motion to polish off the marks.

The starter on your vehicle is located beneath the intake manifold. Because of this, it is rather difficult to replace. I recommend having a professional inspect the vehicle to verify the starter has failed, then perform repairs (https://www.yourmechanic.com/services/starter-replacement) as needed....