Q: How many labor hours should my Chevy dealership charge me for replacing the water pump on my 2004 Corvette?

The reason paint on new cars chips more easily today than it did in the past is because the paint is more environmentally friendly. Traditionally, the majority of car paints were lead-based, but today paints are water-based, which increases the...

The conditions experienced during severe braking can indeed cause flat spots on a tire, but usually only during extreme situations where the conditions are strenuous enough. Flat spots most commonly occur during severe braking situations where the tires lock up...

A fixed hesitation point when accelerating points to a specific mechanical issue either in the ignition or fuel system. The mechanical advance in the distributor needs to be checked for free motion and base timing would need to be checked....

If the old bulb wasn't burnt out by the ballast, the new ones shouldn't either. The most likely cause of your woes are the cheap bulbs. I would strongly suggest only purchasing name brand bulbs (https://www.yourmechanic.com/article/how-to-buy-a-good-quality-headlight-bulb). They may be much...

There are several reasons that this could happen. A system voltage dip or spike can cause all of these systems to illuminate their indicators or a fault that compromises the drivability of the engine such a mass airflow (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) or...

Hello. P0562 is the trouble code for low system voltage. If the computer detects that the overall electrical system's voltage is low, it will set off the Check Engine Light to notify the driver of the issue. The most common...

One common cause of such noise is a failed outer CV joint on the CV axle. If you peer behind each front wheel, underneath the vehicle, and use a very bright focused light to shine on the rubber boots that...

The engine is undoubtedly misfiring (the blinking light is associated with misfiring) and once the OBD-II trouble codes are read they will undoubtedly reflect that. Without the specific codes though, it is unknowable whether the misfiring is global (random, across...

First, be sure that the alert you are seeing is not due to actual low tire pressure. Using a tire pressure gauge, if you do find low pressure in one or more tires, add air but you should also consider...