Q: How do you know if the comfort ride is working on a 97 lexus es 300?

The tire replacement Warning Light is located on the instrument panel. This light illuminates to remind you that it may be time to change your tires. The tire replacement Warning Light is programmed to come on after a certain amount...

Hello. If the car was running BEFORE you replaced all of these parts, the first thing to do is make sure that you have reconnected any wiring (harnesses, plugs, grounds) that you removed when you replaced the numerous items that...

Hello there. I would need a better description of any symptoms your car is experiencing for more precise advice. There are at least eight sensors on the engine. The camshaft (https://www.yourmechanic.com/services/camshaft-position-sensor-replacement) or crankshaft sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) are a couple of the...

Hello. This oil is actually transmission fluid and it is normal to be leaked out while changing them. Just be sure to check the transmission fluid (https://www.yourmechanic.com/services/transmission-fluid-service) after changing these to ensure not too much has leaked out and that...

As with most modern cars, things are more complicated than they seem. The BMW uses a lamp control module to power up the lights. It's not a simple switch-load connection anymore. Among other functions, the lamp control module senses malfunctions...

Hi there. This code is coming up for the transmission having an issue with the kickdown. There could be two things that would be wrong. Either the kickdown solenoid has failed in the transmission or the torque converter clutch solenoid...

This may be a sign of a vacuum leak. A vacuum leak can be one of the most frustrating and difficult problems to diagnose. High idle speed is a common sign and stalling is another. Confirmation of an engine vacuum...

Hello, thank you for writing in. The vehicle is illuminating the Electronic Power Steering warning light. This light may stand for several different malfunctions. The first thing that needs to be done is a scan of the vehicle's diagnostic troubleshooting...

If you have the controls set to heat, and there is airflow but the airflow is cool, that typically means that the heater control valve (https://www.yourmechanic.com/services/heater-control-valve-replacement) is stuck or otherwise non-functional. To have that component inspected, and replaced or serviced...