Q: How do I use voice recognition to delete a paired phone?

When you enter your car, you cannot adjust the sunroof without first turning the vehicle on. However, after turning the vehicle off, you can continue to operate the power sunroof. If you have the electronic vehicle information center (EVIC), then...

While using the auxiliary jack is really about as simple as connecting the device, turning both systems on and then enjoying your music, there are a few precautions that you should follow. Here’s what you should know: Turn the volume...

Considering that your vehicle was dead, required a jumpstart, and had multiple unrelated lights coming on I would say you may have an alternator issue. Alternators are responsible for keeping all of the electronics in your vehicle powered up while...

The hissing noise is due to the A/C evaporator being starved of enough refrigerant. You will need to have refrigerant and dye added to the system and the hissing will go away. Then use a leak dye light (black light)...

The ignition does not need to be programmed in order for the engine to crank over. You should check the starter relay (https://www.yourmechanic.com/services/starter-relay-replacement) on the fender near the battery to see if it is getting power from the ignition switch...

Hi there: Inside the ignition lock cylinder is a series of tumblers and wafers that permit the key to push forward when they are aligned. The black residue on your key may be caused by these wafers being damaged which...

Hi there. This issue is typically caused by a malfunction of the cruise control system or throttle control. However it can also be caused by something as simple as the carpet or floor mats pressing down on the accelerator accidentally....

Hi there. It's very hard to articulate the location of the camshaft position sensor for this engine without illustrations which is something we can't post here, however, it's located on the right hand side of the engine (driver side) near...

Hi Marie: With regard to the code P1372 that was downloaded, there are many potential malfunctions that will cause P1372 to set in addition to the crankshaft position sensor itself being faulty. And, if the sensor itself is suspected as...