Q: How do I use voice recognition to call a phone number?

asked by on

How do I use voice recognition to call a phone number?

You can use the voice recognition system to dial a phone number, even if you don’t have the number stored in your contacts. To do so, press the voice command button, which will prompt you by saying “Ready”, followed by a tone. After the tone, say “Dial”. Following the prompt, say the entire number that you wish to say, without pauses.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I use voice recognition to call a phone number?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Low oil pressure eventually will stall out. Is the oil pressure sensor connected to the fuel pump relay?

Hello. Your oil pressure sensor should not be connected in any way to the fuel pump relay. These are two separate and distinct functions. I would first recommend checking the oil level to be sure there is enough oil in...

Q: I've replaced both of my temperature sensor and my car still has the message ac off due to high engine temp what else can I do?

Claimed by Kevin Gainer

Q: How do I change the outside temperature unit?

The outside temperature can be displayed in either Fahrenheit or Celsius. To change the outside temperature display, press and hold the H and M buttons on the clock, simultaneously, for more than one second but less than three seconds. ...

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.