Q: How do I use the cargo hooks?

Timing belts (https://www.yourmechanic.com/article/how-does-a-timing-belt-work) have teeth for a frictional contact point to the sprockets, which have teeth to match with the belt. The sprockets are located on the engine crankshaft and camshaft. The timing belt is rotated by the engine's crankshaft...

The Driver’s Seat Position sensor helps keep the driver safe in the event of a crash. The sensor will adapt the airbag deployment to meet the needs of the driver. To understand the Driver’s Seat Position sensor. The Driver’s Seat...

Hello and thank you for contacting Your Mechanic. The dimmer switch has a connection for the dome light and controls the dash lights with using resistance. The problem is the dimmer switch contacts have corrosion inside them and have created...

I have seen a family of mice make a home inside the heater blower case. You may need to have the entire heater blower case removed, thoroughly cleaned out, and sanitized (https://www.yourmechanic.com/services/ac-is-not-working-inspection). This may be the only way to remove...

This is common when the vehicle is low on transmission fluid (https://www.yourmechanic.com/services/transmission-fluid-service) or has a faulty transmission control solenoid. Automatic transmissions use pressurized hydraulic fluid to change gears. Every time a gear change is required, the car's computer activates a...

It sounds like the left front brake was stuck in the applied position. The constant friction overheated the brake pads and they started smoking. Heating up may have caused the brake fluid temperature to reach it's boiling point. Even though...

Hi there. Unfortunately, this is a service that our mobile mechanics are not able to perform. Engine replacement has become a growing industry in many large cities, with more specialty shops that offer this service specifically. It's difficult to give...

If your vehicle is 4WD with CV axles in the front, a common cause of clicking and clunking in the circumstances that you describe is a faulty outer CV joint. Such can often be detected on visual exam and with...

If the check engine light is on indicating that the O2 senor needs to be replaced, this could explain the shaking and stalling depending on the functionality of the O2 sensor. As you may know the oxygen sensors (https://www.yourmechanic.com/services/oxygen-sensor-replacement) which...