Skip the auto shop - Our mechanics make house calls

Q: How do I unbuckle a seat belt?

asked by on

How do I unbuckle a seat belt?

To unbuckle your seat belt, simply press the release button on the belt buckle until the latch is released. Then, pull the belt back across your body and return it to the original position.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How Do I Check If My Tires Are In Good Condition?

Checking a tire’s condition is a simple matter of performing a visual inspection, checking for a few specific things. The first thing you want to check is if your tire tread is in good condition. The tire tread should always...

Q: How do I use the Latch anchors?

Your vehicle has Latch anchors on both rear outboard seats, to accommodate a Latch child restraint system. The anchors are located on both sides of each seat. To use them, attach the hooks from the child restraint system to the...

Q: Engine light p0171

As you may know, his code is related to a lean fuel condition which is normally related to many of the items you have listed. I would recommend checking the injector pulses to be sure they are providing enough fuel...

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...