Skip the auto shop - Our mechanics make house calls

Q: How do I set the automatic climate controls?

asked by on

How do I set the automatic climate controls?

A: Your climate controls have an automatic set...

Your climate controls have an automatic setting. When this setting is on, all of the climate control features will be automatically set based on what the system deems is ideal given the conditions. Setting the automatic climate controls only takes a few seconds:

  1. Press the AUTO button on the climate controls.

  2. Set the temperature.

  3. Wait a few minutes so that the system can fully adjust and stabilize.

  4. Adjust the temperature.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Save up to 30%

Get a quote

What others are asking

Q: AC only works for 15 minutes before it stops blowing cold air

A leaking power steering system should be taken care of as soon as possible. The fluid in the system cools and lubricates the power steering pump that spins at a high rate of speed which can fail prematurely if it...

Q: Trouble starting unless I prime the fuel pump, turn off key and then prime again and start it.

The most common cause of the fuel system not holding pressure up to the injectors is the fuel pump inside the fuel tank. The fuel pump has a check valve built into it that is supposed to keep pressure to...

Q: The engine light is on and displaying a P1101 code on my code reader.

Hi and thanks for contacting Your Mechanic. The code P1101 means that the mass airflow sensor (MAF) is out of self-test range. Check to see if the clamps to the sensor are tight. A slight leak of air around the...

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...