Skip the auto shop - Our mechanics make house calls

Q: How do I select whether the welcome screen comes on?

asked by on

How do I select whether the welcome screen comes on?

Your multi-information display welcome screen can come on in two different ways: when you turn it on manually, or automatically when the ignition is turned to On. To choose which setting you would like for the welcome screen, follow these steps: 1. Turn the ignition to On, while making sure the vehicle is completely stopped. 2. Press the Menu button. 3. Use the +/- buttons to highlight Customize Settings, then press Source. 4. Use the +/- buttons to highlight Display Setup, then press Source. 5. Use the +/- buttons to highlight Welcome Screen, then press Source. 6. Use the +/- buttons to choose between On or Off, then press Source. When set to On, the welcome screen will come on when the ignition is turned to On.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!
  1. Home
  2. Questions
  3. How do I select whether the welcome screen comes on?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I reset the elapsed time feature?

The elapsed time feature displays how much time has elapsed since the last feature reset. You can reset the elapsed time with just two steps: Press the display button on the lower left side of the instrument panel until...

Q: How do I use the USB port?

You can connect USB devices (such as iPods and flash drives) to your vehicle via the USB port. To do so, first unclip the USB connector from the port on the center console, and then loose the USB adapter cable....

Q: What would cause RPM skips on 2012 RAM 1500 5.7 HEMI? No engine power decrease or increaes just the RPM skips

Hi there. Assuming that this video is taken at idle with no pressure on the gas pedal at all, it's likely that your idle control valve on the throttle body is damaged or has a faulty connection. An issue like...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...