Skip the auto shop - Our mechanics make house calls

Q: How do I reset the settings?

asked by on

How do I reset the settings?

You can reset all of the customized settings in the multi-information display. When the settings are reset, they return to their default settings. To reset, follow these steps: 1. Turn the ignition to On, while making sure the vehicle is completely stopped. 2. Press the Menu button. 3. Use the +/- buttons to highlight Customize Settings, then press Source. 4. Use the +/- buttons to highlight Default All, then press Source. 5. Use the +/- buttons to highlight Reset All Defaults, then press Source.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I read the tachometer?

The tachometer is on the left side of your instrument control panel, and tells how quickly the engine is moving. The tachometer measures your engine speed in terms of revolutions per minute (rpm). The tachometer is a semicircle, with the...

Q: How do I store a phone number?

The Bluetooth system allows you to store up to 30 numbers for each paired phone. Storing a number is easy: 1. Press the voice command button. 2. When the system says “Ready”, and then offers a tone, say “Store”. 3....

Q: How do I use the turn signals?

Turn signals are very important safety features that alert drivers around you when you are planning on making a turn. To use the turn signals, first locate the turn signal lever, which protrudes from the left side of the steering...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.