Q: How do I cancel cruise control?

Hello. The ABS and traction control / VSC fuses and relays would be the ones to check. There may just be one main ABS relay that powers all of the systems. U1000 and U1001 are codes indicating that a computer...

Hello. The trailer could be wired wrong. It also could be a blown fuse (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-fuse) or relay. There is a running light fuse under the hood and a relay behind the rear bumper. Either one being blown will cause your...

The coolant that got on the belt and pulleys caused the belt to come off. You should have all the pulleys cleaned off of coolant and replace the belt. Check all the pulleys and tensioner for any problems before installing...

You will need to test the computer to scan for data of the temperature sensor to see if the computer is reading the correct temperature as tested externally on the coolant sensor. If the sensor is not accurate then replace...

Hi there. It is not terribly hard to do a V8 swap on this vehicle. The main thing that is needed is the retrofit kit. This makes the job easy and it will make it to where everything fits well....

Hi there. There are a few things that can cause the engine to idle rough or shake at idle. The first would be that the engine or motor mounts are loose or wearing out. In this case, the engine will...

Claimed by Jeff Engstrom

Hi there. What you are describing in the diagnosis of your Hyundai's issues is the major reason why auto part store diagnosis tends to be incorrect. When they complete a 'scan' they simply download a code and make a general...

Your vehicle has an expansion valve mounted at the firewall behind the two a/c lines where they connect to the evaporator assembly. You will need to evacuate the a/c refrigerant and remove line connection and then unbolt the expansion valve....