Q: How do I adjust the volume in the infotainment system?

When you turn the key in your Accord, you expect the engine to crank. If everything’s working normally, it does. However, if nothing happens when you turn the key, or you hear clicking sound (or a series of clicks), it...

You've said the camshaft pulley but those are the ones on the top inside. I'm assuming that you meant the crankshaft pulley. Those Lexus crankshaft pulleys often will not come off because they are kind of tight and they are...

Hello! Although the Check Engine Light has been on before a new issue may have occurred, I would suggest hooking a scan tool up to the vehicle (https://www.yourmechanic.com/article/how-to-read-and-understand-check-engine-light-codes-by-jason-unrau) and retrieving the OBD2 codes. The problem you're having should almost certainly...

Hello. It sounds like the transfer case is going bad causing the thumping noise you are hearing. The transfer case transfers power to the front wheels so that all four tires are working during four-wheel drive. If the transfer case...

You should have a "select/reset" knob up in the right hand corner of your dash that will allow you to click and scroll through the various displays such as instant fuel economy, odometer, trip meter, outside temperature. Be sure the...

Hi there. The problem is the parking brake is stuck on and the brake shoes or pads in the rear are worn out making the wheel cylinder or piston in the caliper move beyond the seal causing the brakes to...

Hello. Engine stalling can be caused by a wide variety of issues. Anything from transmission issues, fuel problems, to wiring problems can all cause an engine to stall when put into gear. If you recently rebuilt the transmission it may...

Hello - the front suspension on your Altima utilizes a lower control arm (https://www.yourmechanic.com/question/when-replacing-ball-joints-can-you-just-replace-the-ball-joints-or-do-you-have-to-replace-the-whole-control-arm-by-debra-l) (with a pressed in ball joint), and a strut/spring assembly. The ball joint comes pressed into the aluminum lower control arm, and is generally not available...

Hello. In order for me to know what is going on with your car I would need to scan the computer for codes to see what is coming up. Though there are a lot of things that can cause this,...