Q: How do I access the center console compartment?

While lowering a car or truck can make it look cooler, increase aerodynamics, and provide a lower center of gravity, more often than not there are downfalls to consider (https://www.yourmechanic.com/article/what-are-the-dangers-of-lowering-my-car) as well. This process can be done professionally but is...

Your car has two main types of pulleys, crank pulleys and accessory pulleys. The crank pulley delivers motion to the other pulleys by means of either a serpentine belt or a v-belt, and they in turn activate the accessories in...

Hello, the most likely cause of the Oil Light coming on at idle is due to a low oil pressure condition. When the vehicle has low oil pressure, it can lead to engine damage if the cause is not addressed...

Hello. On your dashboard, there should be a three piece button that is located between the speedometer and the radio. One of the three buttons should have a plus and minus symbol on it. There should also be a picture...

Your thermostat is located in the front of the engine right next to the distributor just above the water pump. I would recommend having an expert from YourMechanic come to your home to -diagnose and replace your thermostat (https://www.yourmechanic.com/services/thermostat-replacement).

Freely turning the steering wheel past the normal extent (travel limits), while the shaft is disconnected from the splined yoke will damage the "clock spring" in the steering column that the air bag relies on to fire. That assembly should...

Hi there - the "wrench light (https://www.yourmechanic.com/question/what-does-the-service-engine-soon-light-mean"), which allegedly indicates a variety of problems with the drivetrain, is a huge source of frustration on the part of Ford owners such as yourself. It is not well understood, or trained for,...

Billing question sent to CS for the cost of replacing a timing belt on a 2013 Chevrolet Cruze LS.

If it happened just after a tire rotation, I would immediately want to check the wheel nuts (https://www.yourmechanic.com/article/how-to-tighten-lug-nuts-by-john-hege) There is more stress on the wheels in a turn than there is going straight, so if the nuts are not quite...