Q: Hi Peter i have a torque mount that needs replacing in my wifes 2012 nissan altima coupe? how much would that cost?

The problems you are having with your paint on your CRV is not isolated to just your vehicle. There are other owners with less mileage on their CRV vehicles that are having similar issues. The paint used on automobiles is...

If your engine starts but won't stay running (idling) the problem is most likely a faulty idle air control (IAC) motor. (https://www.yourmechanic.com/services/idle-control-valve-replacement) The IAC opens and closes to maintain engine idle, if this component goes out, the engine will keep stalling....

If you are loosing coolant but do not see signs of any leaks, then there is only one other place for it to go. In the engine and most likely out of the exhaust. It's possible that you may have...

Hello. You need to double check the installation since you may have put the brake booster rod on the brake pedal wrong causing binding of the brake switch and causing the system to not bleed correctly. Also make sure the...

Hi there. It sounds like it either has some bad fuel in the tank and lines or a bad idle air control valve. As the vehicle has sat for a year, the fuel should probably be changed out and disposed...

Hey there. There are a few other reasons aside from the thermostat (https://www.yourmechanic.com/services/thermostat-replacement) that may cause the car to overheat such as a clogged radiator (https://www.yourmechanic.com/services/radiator-replacement) or potentially a faulty coolant fan switch (https://www.yourmechanic.com/services/thermo-coolant-fan-switch-replacement). A clogged radiator may prevent the...

The ABS system should of been put into bleed function when bleeding out the brake lines or you may not be able to get all the air out of the system. This is most likely the cause of the rear...

Hello. From what you are explaining it sounds like a timing chain problem. This is a very common issue on this vehicle. It is caused by either the timing chain itself failing, or more commonly it is caused by an...

Hello, thank you for writing in. The master cylinder may make some noises, however it is rather unlikely that you are going to hear these fluid sounding noises over the engine noise. Start by adding the differential fluid and take...