Q: I just bought a used vehicle and after certification by dealer the steering vibrate when applying brake.
Hey Jay, quick question. I just bought a used vehicle and after certification by dealer the steering vibrate when applying brake
My car has 140000 miles.
My car has an automatic transmission.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Engine misfired during smog check
If your engine has a misfire then that can occur for a number of reasons. If it suddenly occurred during a smog test then something may have been knocked loose during the inspection. It is not uncommon to have a...
Plastic cover dragging on ground
Hello. This is probably your front undertray panel, which is usually held in place with quick turn plastic screws. Probably during your last oil change or maintenance, the technician did not get those quick turn screws installed correctly, so they...
I/M monitors incomplete
Hey there. The two monitors not complete let you know that the computer is unable to complete the tests on both of these systems due to problems with the systems. The first thing to have done is to have the...
Car revs at stop sign, no check engine light
This may be a result of a faulty oxygen sensor reading as a result of your exhaust system (presumably your catalytic converter) not operating effectively. As you may know the oxygen sensors which are part of your emissions system read...
Where is located input speed sensor
Hi there: The transmission speed sensor is connected to the transmission on most Dodge cars, including the 2007 Dodge Nitro. This video (https://www.youtube.com/watch?v=y6bwJKFT6aY) is a good one to show you how to replace the input speed sensor. If you review...
Hissing noise.
This may be a sign of a vacuum leak. High idle speed, stalling and hissing sounds are common signs of a vacuum leak. When a vacuum leak is present in an engine, this causes an excessive imbalance in the air/fuel...
I have white smoke coming from my tail pipe I also have to put water in my car about every 3 days what could the problem be
Hi there. Unfortunately, this appears to be a blown head gasket or significant coolant leak inside the motor. White smoke from the tail pipe is caused by coolant that is mixed with engine oil and is burned inside the combustion...
Car has less power when accelerating and louder when accelerating. No Service Engine lights
Slow acceleration (https://www.yourmechanic.com/services/car-is-slow-to-accelerate-inspection) has a variety of causes. Fuel injectors can become clogged over time as the tiny passages become clogged. When an injector is clogged it can degrade the performance of the vehicle and the car may accelerate slowly...
Took my car to the only VW dealership in my town to get inspected. Was told to come pick my car back up as they did not have time
The N80 valve is a "purge valve" located on top of the engine. It is a very simple component in the EVAP system and indeed you can easily replace it yourself. The only way to ensure that the N80 valve...
Related articles
How the Parking Brake Works
A parking brake (also known as an emergency brake) is part of the vehicle’s braking system. You will see a...
How to Buy a Good Quality Brake Caliper
Nothing Nothing is more important for your own and your family’s safety while driving than your car’s brakes. If just one component malfunctions, you could be facing a very dangerous situation. Brake systems are made up of multiple elements, including...
Symptoms of a Bad or Failing Brake Master Cylinder
Common signs of a faulty brake master cylinder include abnormal brake pedal behavior, contaminated brake fluid, and the Check Engine Light turning on.
Browse other content
Services
Cities
Estimates