Skip the auto shop - Our mechanics make house calls

Q: Help to shut all doors

asked by on

I figured out the problem. Thank you.

A: Have you tried replacing the battery? Insid...

Have you tried replacing the battery? Inside the key, the buttons activate triggers on a circuit board and a signal is sent to the vehicle. A weak battery or worn contact may be causing your concern. If a new fob and reprogram are required, it may be best to visit your local dealer for assistance.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Save up to 30%

Get a quote

What others are asking

Q: If I replace the ignition switch, can I use my existing BMW Keys with remote and valet key?

Yes, you can. The ignition switch is separate from the EWS system, so replacing the switch will still allow you to use the current keys you already have. Only if you have to replace a faulty key or EWS module...

Q: Changed the water pump and timing belt now it doesn't want to start

You may have got the timing belt installed wrong. Did you align all the timing marks before you removed old belt so you can get the new belt back on correctly? You should do a compression test and you will...

Q: Suspension system on 2011 Jeep Grand Cherokee

Shocks and struts perform the same job - to control the ride. They just have different designs for different suspension applications. Your vehicle has struts on the front suspension and shock absorbers on the rear suspension. Note that, depending on...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
How Much Does a Mechanic Make in Vermont?
Automotive technician jobs in Vermont have an average mechanic salary of $37k, with some mechanics earning a salary of $53k.