Q: Hello there, I wonder if you can help me. I have recently change my top mounts and strut arms and drop links now when going over s

The first step is to check fuel pressure at the fuel rail. For your vehicle, pressure should be 30 to 40 PSI while running and 35 to 45 PSI with the engine off. Since you've already replaced the pump, if...

No, signal on the instrument cluster concerning the engine temperature usually points to no signal coming from the coolant temperature sensor. This can be caused by a broken wire (https://www.yourmechanic.com/services/fuse-replacement) along the circuit, loose connection, or failed temperature sensor (https://www.yourmechanic.com/services/coolant-temperature-switch-sensor-replacement)....

Stop! This is an extremely serious issue, and it sounds like your vehicle has a blocked oil passage which will only lead to engine failure. Get this checked as soon as possible to prevent damage. This issue can be dealt...

Hi there. The transmission is slipping in the overdrive gear. If the noise goes away when the rpm's increase dropping the transmission out of overdrive, then the overdrive gear clutch pack is slipping. I recommend seeking out a professional, such...

Hi there. The alternator (https://www.yourmechanic.com/services/alternator-replacement) is the same for the vehicles from 1997 through 2005. The battery will determine by the vehicles load on accessories. If the engine is the same with the same type of starter, then the CCA...

Hi There, I have heard good reviews about a couple of the following shops in your area: http://www.tricktrucks.com/ http://www.bowiepowertrain.com/Bowie-domestic-auto-repair.html http://nolimitbmore.com/services/

Check over the vehicle for all safety items on the chassis and cabin compartment. Make sure that the vehicle is safe to drive in any condition. I recommend that if you have to replace any suspension or steering components or...

Hi There, It sounds like you may need to have the cylinder head replaced depending on the damage to the valve seat area. I would suggest having the head pulled off and inspected to determine if it may be reconditioned,...

Hello, thank you for writing in. When the engine is locked up, it means that it is stuck in place for one reason or another, and it will not rotate like it normally does. This is directly related to the...