Q: Hesitation when accelerating

No it is not supposed to collapse. The hose has most likely got soft from oil or other contaminants and should be replaced. If you find the hose has fluid in it and it is brake fluid, then your brake...

Hello there, thank you for asking about your 2003 Land Rover Freelander. If the car goes into reverse, but does not move, this suggests a faulty clutch pack problem in your transmission. This may also suggest potentially a faulty transmission...

Hi there. From the description you have given, the charging system needs to be inspected. First, the battery needs to be charged (https://www.yourmechanic.com/article/how-to-recharge-a-car-battery) and load-tested. Assuming the battery tests good. The battery terminals are clean and tight (https://www.yourmechanic.com/article/how-to-clean-battery-terminal-connections-on-a-car). From what...

Hi and thanks for contacting YourMechanic. The battery has lost all of the amperage that the battery can hold. I recommend replacing the battery (https://www.yourmechanic.com/services/battery-replacement) with a new battery and retesting your vehicle. If a battery voltage is too low...

If the issues only began to occur after the vehicle was fitted with a new MAF and different intake, then it may be possible that the issue is related to the recent work. The mass airflow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) is one...

Hi there. Check the starter and see if is clicking when you turn the key. If the starter is clicking, then either the starter relay or the starter solenoid is not working. If there is no click and the starter...

Good clean fluid is important, but the problem with most automatic transmissions is that the fluid that you change in the pan is only about a third of the fluid in the transmission. Many shops use special equipment to flush...

Hi there - there are a couple of possibilities for this "hard steering" (https://www.yourmechanic.com/question/could-the-power-steering-pressure-sensor-cause-my-steering-wheel-to-be-hard-or-hard-to-steer-by-davon) behavior. It is possible that there is still air in the system, although having driven it some, with many left/right turns, that should be a non-issue....

Hi Marie: With regard to the code P1372 that was downloaded, there are many potential malfunctions that will cause P1372 to set in addition to the crankshaft position sensor itself being faulty. And, if the sensor itself is suspected as...