Q: Hard to shift 3rd and 5th gears

asked by on September 22, 2016

Hi, thanks for your question. If you are having issues with only shifting these two gears, then it is most likely due to bad blocking rings and synchronizers. You can try and have the fluid changed and inspected for metal particles such as brass or other metal. Hope this helps and best of luck!

My car has 70000 miles.
My car has a manual transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Car won't start; key popped when key turned
The battery and/or the starter may be bad. The first thing that needs done is check the battery to see if it is good and will hold a charge. The starter needs over 12 volts with over 175 amps of...
Using Casite EZ Connect Tire Repair for sealing tires
They say it's temporary to cover their own butts so you don't sue them. I have actually used stuff like that. I used a version from the company called, "Slime," and I put it in my wife's tires. I've just...
Does a chevy colbat have 2 knock sensors?
You only have one sensor on this engine. If the P0327 trouble code continues then have the engine checked to see if you have an engine knock (https://www.yourmechanic.com/article/what-does-it-mean-when-an-engine-knocks) or the fuel you are using (https://www.yourmechanic.com/article/which-type-octane-of-gas-is-recommended-for-my-car) is below 87 octane, causing...
Pcm ecu car won't start
Assuming the ECM is still working enough to report problems, getting any problem codes out of the system with a code reader is your best clue at this point - whether the Check Engine Light (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) is illuminated or not....
Removing brake light bulb
Hello. The brake light bulb for your vehicle uses a twist lock type base. To remove the bulbs, gently push down to unlock them from the base, and then rotate them counterclockwise and out. If the bulb is stuck, gently...
Growl Noises when breaking
It sounds as if the noise you are describing is probably coming from the brake pads being worn out (https://www.yourmechanic.com/services/brake-pads-replacement). The friction material of a brake pad is mounted to a steel backing plate, and when the friction material wears...
Power train warning light displayed on my Ford Fiesta 1.5 . Only had it four months and done just under 2000 miles. ( 24000 miles
The best way to determine the cause of a check engine light is a check engine light inspection. This will include checking the vehicle for trouble codes with an OBD2 scanner. Once this has been done, the code that the...
How can I rig my trunk to close until I can see a mechanic tomorrow...it has a u shape in the latch and won't stay closed
Hi there. We really don't offer advice on "rigging" components on a vehicle. However, this video may help you (https://www.youtube.com/watch?v=5rqgEzyVlBM).

Related articles

A Buyer’s Guide to the 2012 Honda Fit
The The 2012 Honda Fit is a fuel efficient car that has lots of head and legroom for drivers and passengers alike. In addition, its five door configuration holds large items like skis, bikes, and surfboards for those who love...
A Buyer’s Guide to the 2012 Lexus HS 250h
Hybrids Hybrids have come a long way in the last few years, and the 2012 Lexus HS 250h is a prime example of just how much they’ve evolved. This sedan is quiet, composed and chock-full of high tech equipment. Key...
A Buyer's Guide to the 2012 Acura RDX
Compact Compact luxury SUVs have come a long way since the Acura RDX first showed up on the scene. However, to this day, Acura still produces one of the best vehicles in this category. The 2012 Acura RDX is a...