Q: Full door will not open, tried pushing button several times and used Manuel but it will not work! It clicks and trying everything

Gas station fill nozzles are designed to shut off when enough back pressure is detected, usually an indication the tank is full. However if your tank is not venting properly, it can have the same effect. Your description would indicate...

I would check with the Alpine distributor who sold you this unit, and discuss your situation with them. They may have included relevant comments on mounting the head unit with the unit itself, but in any case, their Customer Service...

The "rain" smell you noticed is caused by burning radiator coolant. Usually if the coolant is spraying everywhere, there are two parts that might be broken; a radiator hose (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-radiator-hose) (or the connection to a radiator fitting) or a small...

An erratic fuel gauge can be caused by a number of problems. The fuel sending unit in the gas tank can be bad/shorted. The gauge itself can be bad, or a short in the wiring between the sending unit and...

Hi there: In most cases, you'll want to replace the ignition lock cylinder (https://www.yourmechanic.com/article/how-to-replace-an-ignition-lock-cylinder-by-timothy-charlet) for your Volkswagen. We'll have one of our service professionals send you a price quote as soon as possible.

Hi there. Check the wiper motor relay and see if its engaging or not. If the relay is not clicking when you turn on the switch, then replace the relay. Even if the relay clicks, its possible that the relay...

Hello, thank you for writing in. It is nearly impossible to tell what kind of costs you are looking at with this old of a vehicle. 220,000 miles is a lot, but it sounds as if the car was maintained...

Overheating (https://www.yourmechanic.com/services/car-is-overheating-inspection) can be caused by a number of issues. The hose blown off could be the cause as well as an effect. The engine could have begun to overheat before the hose blew off due to things like a...

The upstream oxygen sensor appears to be out of range. The expected value should be between 0.2 and 0.9 volts with a frequency of 1 to 5 Hertz. Your report shows 1.9 volts. I would first look at a real...