Q: Front axle shim washer was bent during re install.
i was changing out the front axle. shim washer was bent during re install. opened up the long side housing. replaced shim. putting it back together gear was put in backwards. axel is in housing with gear on backwards. now I can not get the gear off to install it right. how do I get the snap ring to release
My car has 150000 miles.
My car has a manual transmission.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
How Does the Oil Lubrication Process Work in the Engine?
The lubrication system in an automotive engine (https://www.yourmechanic.com/article/how-a-modern-engine-works) is vital to having a long-lasting engine with normal operating temperatures and metal wear. The lubrication will flow between all the rotating metal components to reduce wear and heat-related damage from friction...
I have a dent right where you open the door so if I suck the dent out will the door open
If the door stopped opening properly after the dent happened, then it's fairly safe to assume that the dent is the reason that the door won't open. Whether or not it will open after pulling the dent out depends on...
Saturn Ion wont change to 4th gear, its an automatic. The P0700 code comes up saying transaxal module. What does this means?
Hello. The code means there is either an electrical or mechanical (hydraulic) fault in the transmission, or the transmission "controls" and in your case that fault is causing your transmission not to shift. The fault itself can range from the...
Misfire - 2003 Ford Expedition
Hello and thanks for your question. When diagnosing a misfire (https://www.yourmechanic.com/article/how-can-problems-with-the-ignition-system-cause-misfiring_2), you would need to determine all of the factors for what could be the problem. When you mentioned that you had switched a coil out from another cylinder to...
Soft clutch, topped off clutch fluid reservoir and clutch pedal became firm/springing back on its own.
It is most common for the clutch hydraulic leak to be from a leaking clutch slave cylinder. You should have the clutch hydraulic system inspected by YourMechanic to see why the fluid is getting low. The fluid gets low anytime...
My car makes a rattle noise when make a sharp turn. I only hear it with sharp turns and when the gas is applied.
Hi There, What you are describing sounds like the beginning of a failing CV joint (https://www.yourmechanic.com/services/axle-cv-shaft-assembly-replacement). A CV (Constant Velocity) joint is a shaft that connects the transmission to the wheels, essentially transferring the power from the drive train directly...
My fuel gauge fluctuates between 1/4 and empty. A friend said that there was a way to reset it, it's supposed to be under the steering wheel.
There is no way to reset a fluctuating fuel gauge. The fuel gauge is bouncing or fluctuating for either the float in the fuel tank has a bad ground in the rheostat or the gauge cluster has a broke or...
Engine is making a Squeaky sound? 2007 Nissan 350Z
Hello - that squeak (https://www.yourmechanic.com/question/my-car-squeaks-when-i-drive-and-while-it-s-idling-by-brendan-d) sounds like a bearing to me - alternator, serpentine belt idler pulley, or possibly the water pump. Time for the stethoscope to narrow it down precisely! I recommend a enngine noise inspection (https://www.yourmechanic.com/services/car-is-making-a-noise-inspection) performed by...
Car Ignition doesn't work. To turn it on you have to switch a box under the steering wheel that came out. I don't know how to fix
Hi there. It is possible that somebody has installed an aftermarket or bypass ignition system on this vehicle, as the standard OEM ignition lock cylinder is not configured like what you have described. It would probably be best to have...
Related articles
The Best Used Cars to Buy If You’re a Painter
If If you’re a painter, and you work for someone else, chances are you don’t care all that much about what you drive, as long as it gets you to and from work reliably. On the other hand, if you...
The Best Used Cars to Buy If You Love Camping
Do Do you love camping, getting back to nature and enjoying life in the great outdoors? If you do, then you know that getting there can be half the fun, and it’s even better if you have a great ride....
How to Buy a Good Quality Axle
The The axle is the glue that literally holds the front lower end of your car together. It is that steel rod that connects the wheel to the transmission gears, and allows your car to keep going. When the axle...
Browse other content
Services
Maintenance