Q: Fog light wiring

asked by on

I have some fog lights mounted to the bumper, but the original installer did a bad job with the wiring. It keeps blowing fuses.

Hi there, it sounds like the wiring is rubbing on a ground somewhere causing excess power to surge through the circuit. Thankfully the fuse is there to protect the bulbs and wiring. One of our certified technicians would be able to help you inspect the wiring and make sure everything is connected properly.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Fog light wiring

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Clunking noise from front of car when driving slowly or turning slowly

Hi there. Most clunking sounds, especially while turning, are attributed to worn out bearings or bushings - especially CV joints, tie rod ends, and also stabilizer bar joints. Not sure why it would only happen while it is hot outside,...

Q: What is The Cost of Parts to Replace a Bad Exhaust Intake Valve on a 1995 GMC Sierra? How Long does it take to complete job?

Hi M.H. Thanks for contacting us tonight. Unfortunately, this is a service that our mobile mechanics are unable to offer. This type of job should be completed at a local engine shop, as removing valves will require special tools in...

Q: Q: Battery keeps dying out

Hello. Typically when these symptoms occur with the security light on, it is always the ignition switch that is causing this. It can also be a short in the electrical system, but most of the time, it is caused by...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...