Q: engine coolant light when i stop

Hi there. You can be experiencing quite a few issues with your steering system. You will have difficulty in your steering if your fluid level is low, there is air in your system, your rack and pinion arms are not...

Hello. A few things I would check are the throttle body (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-throttle-body), the idle air control valve (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-idle-control-valve), and the vacuum hoses. A dirty throttle body or idle air control valve can cause the idle to fluctuate. I would also...

My guess is that the problem is with the body control module (BCM). The BCM functions as the power mode master (PMM). In this role, it receives an input from the ignition switch when the key is turned to the...

Hey there thanks for writing in about your 2002 Hyundai Elantra GT. The high idle is likely a bad idle air control motor (or air leak in the intake system). The misfire also may be caused by the factory spark...

The first thing to do is to remove the fuel tank and fill tube. Have the tank and tube flushed out. Replace the fuel filter and disconnect all the lines and flush all the lines out with water and then...

It sounds like you may have a fuel pump that is not working properly or maintaining enough fuel pressure to keep the motor running. If the engine was run completely out of fuel, there is a chance this could have...

Hi There, You will need to review the return/exchange policy of the shop where the mirror was ordered/purchased. Many different shops have various return and exchange policies that may or may not be universal in terms of ordering and returning...

Be sure the engine immobilizer system is not activated (https://www.yourmechanic.com/article/how-to-shut-off-the-anti-theft-device-in-your-car-by-jason-unrau) thus preventing the car from starting. If the engine is not turning over (cranking) with the key held in the start position, that means that there is a problem...

Generally, this kind of error will trigger OBD code P0740 indicating that there is something wrong with the torque converter clutch. This may be related to any of the following: -A faulty torque converter clutch solenoid -A damaged torque converter...