Q: Does a 2.7l engine iac valve fit a 2.4l iac valve

Hello there. I suggest having the pressure checked with a fuel pressure tool. That will help you know for sure if the pump is or isn't at fault. If you need further assistance, I recommend you have a mechanic, like...

Hi there. You can be experiencing 1 of 2 things. Your vehicle's brake switch which indicates that the brake is pressed allowing you to shift gears may be malfunctions. These typically deteriorate overtime causing the shifter to be "stuck." Secondly...

The bearings inside the front of the air conditioning compressor may have become severely worn resulting in unwanted movement. The extra movement can lead to damage of the drive belt system. I would have an experienced technician inspect the entire...

Hi. Other ML320 owners have reported similar symptoms. Although it is a rare occurrence, it is something that should be repaired. Replacing the yaw sensor does fix the issue, so it is most likely the culprit, especially if there is...

The radiator fan (https://www.yourmechanic.com/services/cooling-radiator-fan-motor-replacement) should come on when the engine reaches a certain temperature, or immediately when you turn the air conditioning on (if so equipped). If the fan does not come on when the engine gets hot but does...

Hey there, thanks for writing in. You may want to have the CV (constant velocity) joints and axles (https://www.yourmechanic.com/services/axle-cv-shaft-assembly-replacement) inspected. When these wear out or become damaged in any way, this can cause a vibrating problem at both high speeds...

Hello. The system is burning the wire connector due to the connection being weak and loose. The wire got hot and melted the first time due to a loose connection causing heat build up. You should also check the battery...

Hi and thanks for contacting Your Mechanic. Check the ground wires to the fan motor. The noise is the current from the fan motor going through the speaker wires. The stereo may be mounted on the same ground as the...

Hello - I think your transmission sluggishness (https://www.yourmechanic.com/question/slow-rough-shifting-in-auto-transmission) is due to high mileage, and low internal hydraulic pressure due to a worn primary pump. Low fluid pressure will make gear engagement slow and weak, with slippage during shifts in extreme...