Q: Do I need to replace the rotors on my 2012 focus EVERY TIME I has pad replaced?

A code scanner is used to access the onboard diagnostic system (OBD) of your vehicle. Not all code scanners are created equal; there are many different scanner types. The most inexpensive scanners on the market today hookup to the OBD...

If you’ve recently purchased a vehicle, you’re in luck. This vehicle doesn’t require any elaborate or tedious “breaking in” activities. However, your new vehicle will last longer and run more efficiently if you follow these guidelines when you first begin...

Engine overheating with AC on is generally caused by one of two possibilities. One, is increased engine load caused by a failing AC compressor (https://www.yourmechanic.com/services/ac-compressor-replacement). The AC compressor adds rotational load to the engine and if the compressor is wearing...

Hello there, thank you for asking about your 1990 Oldsmobile Toronado. You can rule out a blown fuse for both of these issues. If the fuse were blown, the circuit would not operate at all. I'm guessing from your description...

Hello, thanks for writing in. The driveshaft assembly is composed of the driveshaft, U-joints and snap rings. Both ends of the driveshaft connect to the output shaft and differential via yokes. If you would like help with this replacement, consider...

This may be related to a few different things such as a bad thermostat (https://www.yourmechanic.com/services/thermostat-replacement), a failing coolant fan relay, or a blown head gasket. As you may know the thermostat regulates the flow of coolant in and out of...

The oil leak from your valve cover is generally caused by a failing valve cover gasket that is not properly sealing or a valve cover that is not properly torqued down. I would suggest having an expert from YourMechanic come...

Yes, and for a professional to perform this repair requires 4 to 6 hours. The primary timing chain must be removed and of course that means the timing cover has to come off. There is lots of disassembly and the...

Hey Scuba. Thanks for contacting us today. Most of the time, when the idle control valve has been replaced and throttle body cleaned, a low idle is typically caused by a small vacuum leak, restriction within the fuel injectors or...