Q: do all 4 motor mounts need to be changed?

asked by on February 06, 2018

car rumbles and vibrates in reverse and park. i was told the mounts may be the issue. question is, do all mounts to need to be changed or only certain ones?

My car has 40000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Check Engine light and camshaft position sensor code
Hi. If you have a camshaft position sensor code that is coming up, then that is why the Check Engine Light is coming off and on. Most of the time, this is caused by a sensor failure, but it can...
Car won't shift into next gear when driving downhill
If the transmission operates normally in all other driving conditions this sounds like a feature in the transmission program to inhibit upshifts to prevent a runaway condition when going downhill in case the driver is towing or a hauling heavy...
Check Engine Light is on 2004 Toyota Camry
Hi there. The Check Engine Light is an indicator that you have a problem in one or more systems of your car. You would need to have the computer scanned to see what codes are stored and have them diagnosed...
Car Stalls in 2nd Gear after Starting
Test/evaluate shift solenoid(s) on transmission. You can probe for resistance on solenoid coil through the wiring harness but even if within spec, solenoid mechanism could still be sticky or intermittent. Faulty solenoids are a common cause of this type of...
Coolant system temperature oscillates - 2001 Hyundai Santa Fe
Hi there. With having your radiator flushed twice and having a thermostat replaced, I believe that the problem lies within the water pump. There is a build up in the water pump and is causing the water to fluctuate. Remove...
When I turn on the AC, the malfunction light comes on and the car doesn't accelerate well and starts jerking.
The trouble code stored in the vehicles computer may shed some light on what's going on. Turning on the AC adds an extra load to the engine and the computer picked up some trouble when the data figures changed. Consider...
Rough Idle when first started or when wet
Hello, I sounds like you may have a dirty or faulty idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement). As you know, this monitors and reads the air intake as it enters the engine prior to being mixed with fuel while making adjustments...
When I try to start my truck, the lights work but no crank.
First, we need to make sure the signal wire to the starter is properly connected and the power cables are attached properly. I have seen many situations where the signal wire is loose or the connector is broken and the...
where is the bank 2 sensor 1 located on a 2010 ford f-150
When it comes to a Ford, cylinder #1 is on the passenger side of the vehicle, so that makes the passenger side Bank 1. Bank 2 is the driver's side of the engine. Sensor 1 is the sensor in front...

Related articles

A Buyer’s Guide to the 2012 Jeep Patriot
Those Those who love getting off road will often turn to a Jeep. The 2012 Patriot could be a good choice for those who want a quality vehicle for the roads, and when they decide to venture off the beaten...
2014 Jeep Cherokee vs. 2014 Jeep Wrangler: Which One Should I Buy?
SUVs are a crowded market, but Jeep has long been a name to remember. SUVs are generally built on the chassis of a truck and provide the overall handling of a truck instead of feeling more like a car that...
The Best Used Cars to Buy for Senior Citizens
Everyone Everyone needs a way to get around. You need to get groceries, get to doctors’ appointments, visit with family and more. However, senior citizens have very different needs when it comes to buying a used car than other demographics....