Skip the auto shop - Our mechanics make house calls

Q: d4 blinks lost of power high idle

asked by on

my d4 is blingking and sometimes fees like changing gears in low speed , and lost of power too plus my gauge is actinh abnormal

My car has 134000 miles.
My car has an automatic transmission.

This is a transmission code indicating a problem with the transmission. This is most likely why you are experiencing the feeling of shifting gears at a low speed. This light blinking can indicate many different things. I would recommend having an expert use a scan tool to download potential codes from your car which will help pinpoint the cause of the lost power.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: I have rebuild transmission and is not driving out of D and D3.

Hi there. Check the shifter cable alignment to the transmission and make sure that the main valve is aligned up properly. The main valve could be off aligned causing the vehicle to not drive in the D and D3 selections....

Q: Vehicle makes noise while driving and stopped at light.

I suggest having a technician [inspect your car's noise].(https://www.yourmechanic.com/services/car-is-making-a-noise-inspection) It sounds to me like the BTSI solenoid near the shifter could be going bad. If you hear the clicking from the shifter then that's probably the problem. If it is...

Q: Leaking fluid in front of pumpkin rear axle where drive shaft connects to get. Not sure if i have a bad rear pinion seal

With the age of the vehicle, a worn / failed pinion seal is the most likely cause. Inspect the pumpkin and cover for any damage. If it is apparent that the pinion seal is leaking, make sure the pinion bearing...

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...