Skip the auto shop - Our mechanics make house calls

Q: Convertible stop not closing.

asked by on

My convertible top won't close.

Hi. The system for the convertible top has a motor which requires power. The electrical circuits must be checked as well as the motor for faults. Have a technician check for binding in the convertible top assembly and check for hydraulic leaks if applicable. Also, the mechanic can inspect for possible failing electrical components that are hindering the ability to close the top.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: i replaced the cluster and disconnected the battery. when i connected everything again the theft alarm was on and car doesnt start

Hello, thank you for writing in. The first thing we need to determine is if this is a stock alarm or an aftermarket that was installed later. There may be a technical issue with the alarm module itself. The keys...

Q: How do I change the volume with the steering wheel?

You can control your sound system using the steering wheel. To increase the volume, press the Volume + button. To decrease the volume, press the Volume – button.

Q: How do I use the rear window defroster in a 2012 Dodge Ram?

The rear window defroster helps keep the rear window from fogging up. To use the rear window defroster, press the rear window defroster button (a rectangle with three squiggly arrows pointing up through it). This button is located under the...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.