Q: Clutch slave
I replace clutch slave and clutch get hard and still goes to the floor
My car has a manual transmission.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Roof doesn’t work
Unfortunately this is an issue that has plagued Patriots for years, with apparently no one solution that proved reliable in all cases. However, there are two procedures that have proven effective in a lot of cases: Replace the sunroof seal...
There’s a big lag with the throttle
Hello, being a drivability issue it will require some diagnosis with a technician. If you can demonstrate it to the technician it would aid in diagnosis. It sounds like you might have low fluid level based on how you say...
oder of schooling for automotive industry?
Hi there. I have taught automotive technology and I can tell you that you can work while training in most programs. You will find that body repair and automotive repair are two separate programs. The automotive repair program (https://www.yourmechanic.com/article/how-to-become-an-automotive-mechanic), for...
While I'm driving the accelerator disengages and it won't accelerate with the gas pedal pressed all the to the floor.
This loss of accelerator control is a built in safety feature of the vehicle computer and can render the throttle inactive if it sees a problem in a major component or loses communication with the throttle sensor. I have even...
I hear a small noise every time I accelerate the gas
With the information you have provided, it sounds like you may be hearing the air as it is being drawn into the intake manifold. There are other possible causes, but this is the first thing that comes to mind when...
Can an accident cause the alignment to be off and the front left strut to leak even when only the body was damaged visually?
If the speed at time of impact was over 10 MPH and you jumped the curb, the alignment can easily be disturbed not to mention the possibility, indeed likelihood if the speed was high enough, of damage to the unibody...
I have a 2002 buick rendezvous and I'm looking to possibly swap the 3400 for an lx9 3.5
The re-designed gasket (Fel-Pro, for example, in the aftermarket) for the lower intake manifold on this engine, and the revised installation procedure, provide a 100% effective resolution to the notorious leak issue that you are referring to. With regard to...
Got my rear main seal fixed, but my car keeps having a rough idle, cutting off & the Electronic Throttle Control Light is on.
It sounds like you may have a faulty electronic throttle control unit. The electronic throttle unit opens and closes the throttle blade based upon input from various engine control sensors, including the accelerator pedal. This unit also controls, among other...
i have a 2003 GMC sirra Truck. all i did was change the oil i mite of spill some oil on the engine so i s
You will need to let the truck dry out overnight is you do not need to drive it and in the morning if it still has same problem then get computer tested to see if you have codes stored in...
Related articles
A Buyer's Guide to the 2012 GMC Yukon Hybrid
The The GMC Yukon is about as big and powerful as any SUV can ever get. However, in the past, that also meant paying a large sum every time you hit the pump. GMC has addressed this problem with their...
How to Get Buick Dealership Certified
GM/Buick car dealerships offer automotive technician jobs to mechanics who are certified through the Universal Technical Institute (UTI) and GM.
How to Get GMC Dealership Certified
GMC car dealerships offer automotive technician jobs to mechanics who are certified through one of the many programs they have available.
Browse other content
Estimates
Cities