Q: changing a gasket with a mechanic

asked by on

how long does it take to change a gasket.

My car has 102500 miles.
My car has an automatic transmission.

It all depends on the gasket that is being replaced. There are head gaskets, manifold gaskets, oil pan gaskets, etc. - so you would need to be a bit more specific. The mechanic’s experience changing the gasket also plays a factor. The mechanic with more experience may get it done faster than a mechanic that has only done it a couple times.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. changing a gasket with a mechanic

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: After car is warm if I engage in park the heat will drop what causes that?

Hi there. The most likely cause for the engine temperature to drop in park, is the engine thermostat is stuck open, stuck open is better than stuck closed. The thermostat is designed to bring the engine up to and maintain...

Q: Po155cnf bank 2 sensor heater circuit P1620cnf Also code

The P0155 is the oxygen sensor located on the rear bank of cylinders and before the catalytic converter. Given your mileage, both oxygen sensors (pre-catalytic converter) should be replaced. The pre-cat sensors have the most affect on fuel mixture, saving...

Q: How much does it cost for Camshaft cover and Valve cover gaskets, parts and labor?

Billing question sent to CS for the cost of replacing the valve cover and camshaft cover gaskets with the cost of labor on a 2008 Mercedes-Benz CLK350 with a V6-3.5L engine.

Related articles

What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.