Q: Car wont stay running

The first and easiest thing to check would be the fuse. If that's ok, check to see if the switch on the brake pedal itself hasn't fallen off. If that doesn't solve your problem, I recommend having a mechanic, such...

Hello. Most of the time on this vehicle the reason why the wipers stop working is because of the park sensor for the wipers. This detects the position of the wipers and that is used for operation. If the sensor...

From what you are describing it sounds like you have either a failure in the transfer case (https://www.yourmechanic.com/services/transfer-case-output-shaft-seal-replacement) or in the front axle actuator. I usually drain the fluid from the transfer case first and check it for metal. If...

Code p1128 refers to "Closed loop fueling not achieved", meaning that for some reason the engine is not reaching a state where it is able to run using the information from the engine sensors. When the engine is first started,...

Hi there. Air bags on modern cars are deployed not necessarily on the speed of impact, but multiple variables including location of the hit along with the g-force of the impact. It could be less than 10 mph or more....

Hello - the P0052 (https://www.yourmechanic.com/article/p0052-obd-ii-trouble-code-ho2s-heater-control-circuit-high-bank-2-sensor-1-by-spencer-clayton) code is for a failing heater circuit on the oxygen sensor before the catalytic converter on cylinder Bank 2. The heater circuit allows the O2 sensor, which helps regulate fuel mixture, and thereby how well...

It's pretty clear that your battery is dead, and your charging system is also not working. You need to put a new battery in the car and then check the charging system. Don't be fooled, once you install the new...

It sounds like you popped a fuse. Since it happened as soon as you turned on the passenger side light, the fault may be in the light assembly. The fuse panel is accessible on the left side of the dashboard...

I would recommend retracing your steps. If you disconnected the battery before replacing the sensor, this could be one cause of the vehicle not to start. A new crankshaft sensor should not have prevented the vehicle from starting. The cause...