Q: Car wont start

You can store important items in your glove box to keep them safe by locking it. You just press open the latch on the glove box to access items inside. Use the mechanical key or the master key and insert...

Since you have already replaced the plugs and wires, that narrows down what the problem could be. The most likely culprits of your issue are a faulty fuel injector or ignition coil. However, there is a slight chance that there...

From what you've described it sounds like you may have spun a bearing in the crankshaft or a rod bearing. Running an engine without oil is never good so you'll likely need to have the engine checked to verify this....

Most of the time it is unnecessary to use a racing crank in a street motor, unless you are planning on building a 700HP+ motor. The racing cranks are stronger, better balanced, more aerodynamic, and also much more expensive. Most...

Backfiring (https://www.yourmechanic.com/article/what-causes-a-car-to-backfire) occurs when the air fuel charge in a cylinder(s) fires at the wrong moment often when the exhaust valve is opening. There are backfires into the intake manifold, too, however. If during your work on the engine you...

Hello. A ticking sound from the engine can be caused by a few different things. Two of the most common causes, as you already figured, are from faulty injectors or an issue with the valve train. If the clicking is...

If you have really found evidence of cooling system blockage(s), then your continued overheating could simply be due to the fact that not all blockages are yet removed. Also, you could have multiple faults, that is blockages plus perhaps a...

If the plastic you are referring to is simply a covering over a metal terminal, then a field fabricated repair can be effected and that would be something such as heat activated shrink wrap or weather resistant electrical tape. In...