Skip the auto shop - Our mechanics make house calls

Q: Engine idle fluctuates and dies.

asked by on

Just wont idle alone but when it does idles like crap

My car has 211000 miles.
My car has an automatic transmission.

This may be a result of a dirty or failing idle air control valve. The idle air control valve reads the air intake as it is mixed with fuel prior to being injected into the engine at low speeds and at idle. Since this valve is controlled by the vehicle’s computer, it will adjust idle speed based upon other measurements such as engine temperature, intake air temperature and electrical system load or voltage. When you accelerate, the engine RPM increases, and as you let off the gas, the RPM slowly returns to the normal idling speed with the help of the idle air control valve making the transition from a higher RPM back down to idle speed. When the engine RPM drops below the normal range of about ~800 RPM, this often times will cause the engine to stall indicating a dirty or faulty idle air control valve. I would recommend having an expert from YourMechanic come to your location to diagnose and replace your idle air control valve.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Rough Idle when first started or when wet

Hello, I sounds like you may have a dirty or faulty idle air control valve. As you know, this monitors and reads the air intake as it enters the engine prior to being mixed with fuel while making adjustments to...

Q: My compressor went out. Will that cause my engine to not operate?

Hello. If you have an engine that is cranking but not starting, then you need to look on dashboard to see if the theft light is flashing first. If it is, then try a different key to see if that...

Q: Does a differential fluid change include opening, scraping, and replacing the gasket seal?

Hello. Depending on which way you choose to service the fluid, it may be necessary to remove, clean, and reseal the differential cover. As there is no drain plug on this differential housing, draining the differential fluid will either require...

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...