Q: Car horn broken

asked by on

The car horn is not working.

The horns on the vehicle would need to be checked to see if power is getting to the horns. The system has a fuse, relay, clock spring, and horn pad that may be preventing the horns from getting power. There are no problems that stand out on these vehicles, and a standard diagnostic procedure would be needed by a mechanic to find the problem. I recommend having a mechanic, such as one from YourMechanic, come out to you and inspect your broken car horn.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1,000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Car horn broken

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Where is the relay flasher located in the 2002 Hyundai XG350

Hello -both the flasher unit and the relay for it are close to each other, and under the dash just left of the steering column. The knee crash pad will need to be removed to make it easier to get...

Q: Q: How do I use the horn?

Your horn can be a key safety feature, as you can use it to get the attention of surrounding drivers. To use your horn, press the center of the steering wheel in. The horn will honk for as long as...

Q: Car stalled in high water

Hopefully, its just the starter that is faulty. If the engine did suck in water it may be hydro-locked. You may remove the spark plugs and turn the engine over by hand to remove the water. Worst case scenario is...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...