Q: Can a BBK X-Pipe go on a 2004 mustang v6 3.8L?
Can a BBK X-Pipe fit on a v6 2004 mustang 3.8L?
My car has 182000 miles.
My car has an automatic transmission.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
How bad is engine failure for the car, should I get rid of it?
There is really no way of knowing how long an engine will last, but one could expect it to last more than 62,000 miles. GM has been trying to figure out why there is a common failure across many models...
How do I turn off a remote vehicle start?
If you want to turn off the vehicle after a remote vehicle start, follow these instructions: 1. Press the remote vehicle start button on the remote keyless entry (RKE) transmitter. Hold the button until the parking lamps turn off. 2....
Car overheats after replacing radiator
While there could be a few different causes that could lead to a vehicle overheating after a repair, it sounds like your Acura TL may have had an issue where air was left in the cooling system after the radiator...
Yaw rate sensor faulty
Hi. Other ML320 owners have reported similar symptoms. Although it is a rare occurrence, it is something that should be repaired. Replacing the yaw sensor does fix the issue, so it is most likely the culprit, especially if there is...
Steering wheel hard to turn after alternator replacement
Have the system scanned to see what is causing the light to turn on first. The low voltage conditions might have caused the problem and would need diagnosis of the code to fix the issue. Your power steering pump (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-power-steering-pump)...
Can an ABS traction control problem cause your car to shut down?
The ABS system will not cause the engine to die. You will need to have the engine scanned for any trouble codes to see the reason you are having the engine stall. This is necessary to pinpoint the cause for...
Can i buy a used pcm and have the dealership reflash it to my car?
Hello, thanks for writing in about your Dodge Challenger. From what you've described, this is a question you'll have to ask the dealer. Most PCM's I know of do not let you reprogram them to a different vehicle VIN number...
I get a vibration when I put the car in gear in neutral. It runs smooth. I was thinking motor mounts?
Hi there. Engine mounts can definitely cause a roughness at idle, clunks, and thumps upon acceleration. Smooth out of gear and rough in gear is one indication of a mount type issue (https://www.yourmechanic.com/services/engine-mount-replacement). It may feel better in reverse than...
Fuel injector problems
Hello. Thanks for writing in. The diagnostic code that is triggering your warning light it's a fairly generic code relating to a bad reading at one of the sensors. This bad reading can mean that there's an electrical or mechanical...
Related articles
A Buyer’s Guide to the 2012 Ford Fusion
Choosing Choosing a mid-size sedan for your family can be a tough call. There’s a lot of competition out there, including really popular models like the Honda Accord and Toyota Camry. Among all those, though, the 2012 Ford Fusion really...
A Buyer’s Guide to the 2012 Ford Fiesta
This This subcompact vehicle is available as a 4-door sedan as well as a 5-door hatchback. The prices for the vehicle are very low, even for the models that are decked out with all of the optional features. Those who...
The Best Used Cars to Buy If You’re an Interior Designer
As As an interior designer, you need to transport a great many different items, including fabric, paint and wallpaper samples and sometimes even furniture items. You probably don’t handle overly large loads very often, and when you have to, you’ll...
Browse other content
Estimates
Services