Q: Call stalls when brakes applied

The tire identification number (TIN) helps you know what specifications your tires are. This is very important when the time comes to replace your tires. Your TIN is located along the outside of each wheel; however, if it is worn...

After starting your truck with remote start, you can turn it off using remote start also. You just need to use the key fob. To turn the engine off after using remote start. Press the 2X button two times.

An engine that moves side to side in the engine bay can be commonly caused by defective motor mounts (https://www.yourmechanic.com/article/how-long-do-engine-motor-mounts-last). If the motor mounts wear out or break, they will not be able to properly secure the motor in the...

The choppy sensation you are feeling when applying the brakes is most likely unevenly worn brake pads and/or rotors. When brakes are applied heavily or held for extended periods of time, this can generate an enormous amount of heat. As...

Hello, The slave cylinder is meant to be bench bled just as a master cylinder is. If this is not done it can cause air to remain in the slave cylinder. This will allow the slave cylinder to fully compress...

Hi there - the lack of heat (https://www.yourmechanic.com/question/heater-not-working-reliably-is-it-caused-by-a-bad-thermostat-by-thomas-c) from your HVAC system could be a couple of things: bad thermostat, heater control valve, or air in the cooling system. If the engine come up to proper temperature and stays there...

Hello. A leaking intake manifold gasket can definitely cause the vehicle to run like this. It will not only cause excessive amounts of air to enter the engine, but it will also cause the sensors to not read right. It...

Sent to CS

Hi there. Since the check engine light is coming on I would have to scan the computer for codes to see what is happening. It sounds like you may have an intermittent issue. Most of the time this is caused...