Skip the auto shop - Our mechanics make house calls

Q: Bumper low

asked by on

My bumper looks too low.

You may have overloaded the bumper, causing it to shift down. You may be able to adjust this, if nothing got bent. I recommend having a mechanic, such as one from YourMechanic, inspect your bumper - be sure to indicate whether the issue is with the front, or rear bumper, when you book your appointment.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: RPMs very low

It sounds as though you may have a vacuum leak. A vacuum leak is simply unmetered air that is allowed to enter the engine and disrupt the air/fuel ratio. This can cause many symptoms including a rough, low idle. There...

Q: My back windshield wiper isn't touching the glass except at the end.

Hello, thank you for writing in. Typically when the wipers are having these types of issues, the spring in which pulls the arm to the window is weak or broken. You can test this by comparing your wipers to wipers...

Q: Fuse keeps blowing

The turn signals are powered in a couple different ways. The brake light fuse and the turn fuse. If either are blown then you will have issues of no turn signal or turn signal stops when you push on the...

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.