Q: Broken headlights

This is a common issue for this generation of Highlander. The contacts in the hood latch for the alarm system wear out or otherwise get damaged through use. If the alarm computer is not sensing proper voltage through the switch,...

Purchasing a new set of tires (https://www.yourmechanic.com/article/how-to-buy-good-quality-tires) can be an exciting moment, though it may take some time for the sticker shock (https://www.yourmechanic.com/article/how-to-negotiate-the-price-of-tires) to wear off. You may have chosen the tires for your car based on cost, performance (https://www.yourmechanic.com/article/understanding-tire-service-descriptions-speed-rating-and-load-index),...

The vehicle identification number (VIN) is a number that is unique to your vehicle, and is used to legally identify your car. The VIN is also necessary for registering your vehicle. You can find the VIN on the top left...

Sounds like your are having problems with your drive belt/s. The screeching sound comes from the belt slipping on one of the pulleys it is riding on. If it is slipping and you give it more throttle, it's just going...

From what you've described, it sounds like your engine mounts are bad. At low speeds your engine will shake until you reach higher speeds. To fix the problem, you will have to get the engine mounts replaced. To avoid any...

Hello. A common problem when rebuilding rear drum brakes is that the brake cylinder has too much air or fluid in it causing the brake shoes to be pushed too far out. Then the brake drum won't go back on...

Hey there. This may be a sign of a dirty or failing mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement). The mass air flow sensor is a unit in the intake system that monitors air intake as it is mixed with fuel prior...

Hi there. By looking at the photos that you have provided is shows that the PCV (positive crankcase ventilation) valve is blowing by and causing engine oil to go through the PCV tube. Since your engine has a turbo on...

If you left any connectors loose or broke and seals in the process of the repair, a bad vacuum leak may cause your concerns. A technician equipped with a professional scanner may be able to hook up to the car...