Q: Brake lights not working in 1998 Saab 900

asked by on

My brake lights are not working.

The third-brake light should be checked to see if it is working, first. If it is not working then the brake-light switch, a bad fuse, or an unplugged harness could be the problem. Try giving your emergency flashers as a quick test. If brake lights still do not work, I would recommend having a certified mechanic come inspect your brake lights to diagnose your issue.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Brake lights not working in 1998 Saab 900

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: 1998 chevy suburban 2500 4x4 7.4 / 4l80e limp mode?

If the check engine light did come on and the trans went into limp mode, often there will be a fault code stored to shed some light on the problem. The trans fluid level and condition can be checked and...

Q: Robert, what are the minimum thickness of the front and rear rotors for a 2013 vw tiguan?

The minimum thickness for front and rear brakes is 2/32.

Q: Rough when accelerating sluggish

Hello. One of the first things that I recommend checking is the fuel pressure. Have a technician check the fuel pressure on the vehicle to ensure it receives the proper amount of fuel as the the gas pedal is depressed....

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...