Skip the auto shop - Our mechanics make house calls

Q: Battery gauge and dash lights need replacing.

asked by on

The dashboard will not turn on any more and some of the dash lights need to be replaced. The battery gauge also doesn't seem to be working right.

Since you are having intermittent problems with various parts of the instrument cluster, it’s very likely that the cluster assembly needs to be replaced. A qualified technician, such as one from YourMechanic, will be able to diagnose this for you. They will also be able to make the necessary repairs.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: My high beam light does not work on left side. I don't think it is the bulb.

Hi there. There could be an issue with the high beam switch. Check to make sure that the wires are connected correctly to the high beam switch. Also, check the bulb in the high beam on the left side. See...

Q: Low rpm & stalling

This is often times related to what is called an idle air control module which regulates the air flow at idle as the air enters the intake system and is mixed with fuel before being injected into the motor. When...

Q: Electrical problem, shuts down when I turn the key

Having a car that won’t start or unlock can be frustrating. Since you might have two or three different concerns, I will answer them in order that they were presented. Let's start with the car randomly shutting down. Does...

Related articles

What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.