Q: Back end sitting on axle and tires.

asked by on January 13, 2016

I made a turn and my back tire sounded like it had popped, but it hadn't. My whole back end is sitting on the axle and tires.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

How do I adjust the distance to empty calculation?
The distance to empty feature tells you approximately how many miles you can drive before you run out of fuel. Because you get worse fuel economy when towing a trailer, your distance to empty number is much lower when a...
How do I release the parking brake?
The parking brake is a very important safety feature that helps keep your car from rolling when it is parked. However, it is very harmful to your vehicle to drive with the parking brake on. You should always release the...
Antifreeze leak
Coolant leaks will only get worse over time. Generally, when coolant is leaking there will be a white residue at/or near the leak source. The best way to locate a leak that may not have an obvious source is performing...
Dealer is saying my exhaust manifold needs fixing. 75,000 miles only. Should I get a second testing from an independent source?
You did not state the model or engine but I would say the exhaust manifold (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-exhaust-manifold) may have a crack or is warped. The dealer would not say you need a manifold unless a problem was noted. There has been...
No Brake lights, hazard lights or turn signals
Hey there. The brake lights use 20 amp fuse number 13. Check fuses (https://www.yourmechanic.com/article/how-to-check-fuses-by-rocco-lovetere) 3, 7, 10, 13, and 21. All of these fuses (https://www.yourmechanic.com/services/fuse-replacement) should be good in the fuse panel under the left side of the dash. Also...
I put a new transmission the truck will not move until high RPM
It sounds like a defective torque converter or a bad transmission to me. Double check your fluid level after cycling the shift lever through the gears. Check your electrical connections and the adjustment of the range sensor (https://www.yourmechanic.com/services/transmission-position-sensor-switch-replacement). Check for...
Can't shift into reverse 1st or 2nd
Cable adjustment was the correct thing to try, but it won't help much if the ball and socket in the shifter is bad. The VW shifters use a nylon ball and socket joint that can crack, throwing everything off. Try...
Engine light on code P0401
Assuming that the passageways, including any through and within the plenum and intake are truly completely clear, there is likely a problem with other EGR system components. On your vehicle, Diagnostic Trouble Code P0401 (https://www.yourmechanic.com/article/p0401-obd-ii-trouble-code-exhaust-gas-recirculation-flow-malfunction-by-jay-safford) involves not just blocked passageways...
How to replace the engine fuse box 2010 chev hhr
Hi Lynda. Thanks for contacting us tonight. Replacing the fuse box is a rather delicate procedure that requires some specialty tools to complete correctly. With the car being more than five years old, it's quite possible that you're going to...

Related articles

The Best Used Cars to Buy for Teenagers
If If you’ve decided that you’re ready to purchase a used car for your teenager, then you’re probably pretty picky about what you’re looking for. Likely affordability, safety, and fuel economy are high on the list. With that said we’ve...
How to Buy Good Quality Tires
When When it comes to parts that are important on your vehicle, it’s hard to find something that is more important than your tires. Good tires make a massive difference, not just in bad weather, but even good weather too....
How to Replace a Front Axle Engagement Switch on Most Cars
The switch that engages the front axle fails when it gets stuck, does not activate the four-wheel drive, or is difficult to engage.