Q: Valve cover gasket and starter labor and parts? mechanic charging me 900.00 - 2004 Nissan Xterra

asked by on November 28, 2016

need a round about price on a val cover gasket and starter for a 2004 Nissan xterra / / mechanic trying to charge me 900.00 for both.

when they repair the gasket do they repair both sides?

My car has 154182 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Problem with airbag light.
A common reason airbag lights come on is because something is interfering with the seat belt switch — the sensor that detects if the belt is properly fastened. If there is nothing in the seat belt I would have a...
Turn signal causing high beams to come on
The symptoms described lead me to believe that your Cadillac may be experiencing a failing combination switch. The Cadillac’s turn signal switch controls a variety of lights, as well as your cruise control, and receives more use than any other...
Battery jumped, but idling, missing, goes up/down
Hi there. This happens frequently on this vehicle when there is a loss of power. I usually start by checking the fuses to make sure that none of them failed during the jump. If they are fine then I scan...
What can cause your car to stall out and what can cause the rpms to go up?
It sounds like you are getting a bad reading from the crankshaft (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) or camshaft sensor (https://www.yourmechanic.com/services/camshaft-position-sensor-replacement). Have the computer scanned and the data stream monitored for problems with the two sensors to see which one is causing the stall...
Shifting won't go into gear - 1973 Chevrolet C20
Check fluid level in the transmission. Did you correctly engage the front pump with the torque convertor, and filled the torque convertor with fluid before installing it? Let the truck idle 15 minutes or so, and check for Drive/Reverse after...
Can i still put headers if i did a muffler delete?
Hello. A muffler delete should not interfere with the installation of any exhaust manifold. The exhaust manifold is bolted to the head and runs from the engine bay, while the muffler is on the rear, underside of the vehicle. If...
When ever I give my car a little gas I hear the fan get louder
If the noise is loud and constant then the cooling fan clutch is stuck in the applied position, causing the fan to be locked to the water pump shaft. The fan clutch is suppose to change as the temperature changes...
Rich run, bad start, sometimes white smoke
The white smoke is a bit worrisome - usually an indicator of a blown headgasket, which will also cause rough running, especially at low speeds from a compression imbalance. The throttle position sensor (https://www.yourmechanic.com/services/throttle-position-sensor-replacement) may also be sending "off" signals...
Car cranks but won't start.
Check the main fuse to the engine and see if its burned. If the fuse is good, then check the wiring under the dashboard and see if there is anything loose or damaged. A loose or damaged wire will cause...

Related articles

A Buyer’s Guide to the 2012 Nissan Versa
In In the world of subcompact sedans, the Nissan Versa is a serious contender. Not only does it come with a low price tag, but it also includes a lot more features than you’d expect for a subcompact, especially one...
The Best Used Cars to Buy If You Live in the Country
Living Living in the country is a whole different way of living. You deal with rough and uneven roads, mud, snow, rain, and ice and you need a vehicle that can stand up to these kinds of conditions with ease....
Symptoms of Bad or Failing Intake Manifold Gaskets
Common signs include the engine constantly overheating, coolant leaking, engine misfires, and a decrease in power, acceleration, and fuel economy.