Q: Q: Airbag Light on

asked by on

The Airbag Light is on.

The illuminated Airbag Light means there is a problem in the supplemental restraint system (SRS). The control module continuously monitors the performance of this system and turns on the light if it detects a problem. The first step is to retrieve the SRS diagnostic trouble codes (DTCs). These codes provide a starting point for the diagnostic procedure. While there are countless reasons for the warning light, one common source of failure for your vehicle stems from the electrical connections under the seat. A trained professional will be able to determine the cause of the illuminated Airbag Light, and recommend the best path to repair. I suggest giving YourMechanic a call.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: Airbag Light on

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Car stalls when coming to a stop

This sounds like an airflow issue. Either the intake air is not being measured properly on deceleration, or the throttle is not adjusting air properly (i.e. the throttle motor or position sensor). Fault codes should be read out of the...

Q: Q: Car won't start

This may be related to a faulty starter solenoid. The starter solenoid is located on the starter and has internal electrical contacts that transmit electricity to the starter. When this fails, it may cause a clicking sound and will not...

Q: Where is located the sensor camshaft on my avenger 2009 2.4l?

Hi there. The camshaft position sensor is located in the back of the engine next to the EGR engine gas recirculation valve attached to the cylinder head under the valve cover. It would be round with two bolts and have...

Related articles

Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.