Q: Air conditioning has died

asked by on

My air conditioning has died.

Hi, it sounds like it could be the pressure transducer or a leak in your A/C system.  If the transducer goes bad then it will cause the A/C not to engage. If there is a leak in the A/C system, those will need to be fixed or your refrigerant will get low. I would recommend having a qualified mechanic from YourMechanic to come out and diagnose your A/C issue to make the proper repairs.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Air conditioning has died

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: crack in theromstat housing

Hi there. This is a common problem on this engine. If the housing is cracked then the entire intake manifold needs to be replaced as an assembly. There is no repair that will ensure that it will not leak any...

Q: My inside lights flickered and now they don't work

While it is possible that the bulbs have gone out, it is more likely that one of the switches have gone out. If the lights were activated by the door opening, the switch you are concerned with will be by...

Q: Car misfires, with a P0306 code 2001 Dodge Intrepid 2.7L

Hello - I note that you do not mention replacing the plug wires and plug boots. If these components were saturated with oil by the leaking valve cover gasket, they may still be shorting out, even with new plugs and...

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.