Q: Air conditioning belt

Engine displacement is the total volume of an engine's cylinders added together. To figure out the engine’s total volume displacement, you would need to know the bore, which is the diameter of each cylinder, the stroke, which is the distance...

Despite having the disc brakes and brake pads replaced on your Dodge Durango, there can be other reasons that could be producing these concerns. With the front brake rattling and steering wheel shaking, it is possible there was a part...

Besides the item you listed you would need to have the intake manifold, head gaskets, hoses checked. This engine has had all of these components fail. Your cooling fans will need to be checked for proper operation also. My recommendation...

Since the steering column was opened, and you not only have faults showing in the ESP, ABS, and BAS systems with the indicator lights, but you also have the SRS light on as well, I am inclined to believe that...

Hi there. Thanks for writing in about your 2005 Ford Mustang. This could potentially be a faulty fuel pressure sensor (https://www.yourmechanic.com/services/fuel-pressure-sensor-replacement) or possibly also a bad mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) causing an imbalance in the air-fuel ratio. You should...

This may suggest you have wheel bearings going out. A wheel bearing will usually fail due to pitting or small damage on the surface of the rollers or the bearing race. Both the surface of the rollers and the race...

The system hold 1.0 lbs of refrigerant for the air conditioner. Remember if you lost oil out of leak then the system oil total is 4.5 oz. You may need to add a couple oz of oil also. The system...

Hi There, If I am understanding your question correctly, it sounds like you have used a slightly smaller brake line (inside diameter) on your truck than the original brake line resulting in a bit more constrictive brake fluid flow. As...

Hello. If the push rod continues to come out of the slave cylinder then you either have an alignment issue with the cylinder, or more commonly it is because the clutch disc or pressure plate have failed. Too much clearance...