Q: After running my car for awhile shut it off it's smell like burnt water coming from the moter. It's not over heating .

This is a common issue for this generation of Highlander. Toyota released a technical service bulletin (TSB) related to cam housing oil leaks. The associated TSB (T-SB-0321-08) covers the inspection, diagnosis and repair of the cam housing oil leak. However,...

I’ll assume you have power windows. There are two key components. The lift motor, and the regulator. Either one could be the problem. It could also be a defective switch, or a wiring issue. A qualified mechanic from YourMechanic can...

There are few situations that require the engine to be revved to 2200 rpm when the transmission is in neutral. Some small ticking noises can come from exhaust leaks at the exhaust manifold (https://www.yourmechanic.com/services/exhaust-manifold-replacement). One thing some people try to...

When the IMA light is on in the hybrid Honda Civic models, this usually means that the battery pack (not to be confused with the starting battery) is no longer charging properly. This is typically is a part that has...

As with any vehicle, they are prone to mechanical problems and issues, even when properly maintained. However, as with anything else, if it is properly maintained, you will greatly enhance your chances of prolonging the life of the engine and...

Hello. This can be caused by a few different things. Most of the time, this is caused by a restricted radiator (https://www.yourmechanic.com/services/radiator-replacement) or a water pump (https://www.yourmechanic.com/services/water-pump-replacement) that is getting weak. It can also be caused by a head gasket...

Hi there: The 2004 KIA Optima LX V6 offers optional 4-wheel ABS systems. It really depends on whether or not the option you have came with this optional upgrade. To determine this, you should call a local KIA dealership and...

Hi There, The rod knocking you are hearing in your 2002 F150 may be related to a rod bearing that is beginning to fail. Adding additional oil to the motor may temporarily solve this, but it will eventually come back...

You will need to put key in and then turn to the on position. This is position just before you turn to start the truck and then you can push in the pin using a thin screw driver or punch...