Q: 84 ltd crown Victoria trying to swap from trottle body to the 89 fuel rail system do I need to change the computer

This code may be caused by the canister purge solenoid is leaking or you did not tighten the gas cap. Either way the leak should be cleared first and do a physical inspection of the fuel system. Then to check...

Hello. If your coolant overflow tank is steaming and overflowing, then that means the vehicle is running hotter than normal, and may even be overheating. The vehicle will need to be inspected for possible overheating issues (https://www.yourmechanic.com/services/car-is-overheating-inspection) and any repairs...

You are asking to name a wire from the alternator to the starter and relay to starter. The wire from the solenoid to the starter is called the main positive starter cable. The wire from the relay to the alternator...

Hello. We will be very happy to assist you with your 2005 BMW 330xi. Your description sounds like that of a broken ball joint (https://www.yourmechanic.com/services/ball-joint-front-replacement) or constant velocity axle (https://www.yourmechanic.com/services/axle-cv-shaft-assembly-replacement). Especially being that the wheel had a feeling like it was...

Hi there, thank you for asking about your 2000 Dodge Grand Caravan. In most cases, the symptoms you're describing are related to a problem with your radiator thermostat (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-thermostat). The thermostat is supposed to open the radiator to flow coolant...

Hello. The symptoms you describe would suggest that the starter is not disengaging immediately from the engine. This is caused by damage to either the starter drive, the engine's flexplate (or flywheel) or both. The symptoms will only become worse,...

Depending on what model Kia you have the blower relay is in the instrument panel main fuse relay box. The blower intermittently may not come on and blower is bad and binds. Tap on blower to see if it starts....

If the noise did not start until after the alignment was done then you need to return to see if they left something loose or have an explanation for the noise. If you had a tire rotation then a tire...

Hi there. I honestly hate hearing horror stories like this and am very sorry this has happened to you. There are several things that could have caused this issue, ranging from the oil service place forgetting to put the oil...