Q: 2014 ford f150 stopped going into recycle air mode.

Tire rotation is an important maintenance step. It helps to ensure that all four tires wear evenly. It should be done at roughly every other oil change, although your frequency may vary. You also need to follow a specific pattern....

If you have the 2.0-liter EcoBoost engine, you should use SAE 5W-30 or equivalent oil. If you have the 3.5-liter V6 engine, you should use SAE 5W-20 or equivalent oil.

The latch assembly that springs the door open is faulty internally. These can be removed and a new unit installed. Trim tools should be used to pry the fuel door latch unit out to prevent damage to the paint on...

No, the alternator provides voltage to the battery and other components. The PCM could possibly discharge a battery if it leaves a relay or another circuit on, but most likely is is not the cause of your alternator failure. If...

Hesitation to accelerate can be due to spark, air, or fuel. With you vehicle being close to 10 years old, it is a good idea to do a few maintenance procedures. If you suspect the spark plugs (https://www.yourmechanic.com/services/spark-plugs-replacement) need to...

Older vehicles used to have replaceable lenses (just screwed on) but most vehicles made in recent decades have the lens integral with a housing or larger assembly. Depending on the vehicle, the cost of the assembly is often manageable particularly...

Hi there - great diagnostic work! At this point, having identified which circuit is causing the drain, you will need a wiring diagram that identifies what other devices are on this circuit (clock, underhood light maybe?), and could be drawing...

A logical first step is to have the battery load tested (https://www.yourmechanic.com/services/battery-is-dead-inspection) and, at the same time, measure the output of the charging system to determine if the charging system is functioning. If the battery fails the load test (OR...

Hi there. Well, to be honest, the biggest reason why these intakes are famous for failing is due to consumers pushing the edge on overheating issues. Although the plastic (polymer) intake tends to be susceptible to causing head gasket damage,...