Q: 2003 mitubitchi outlander turns over but sometimes won't start but sometimes will.
Car won't start "sometimes". Turns over but won't start.
My car has 200 miles.
My car has an automatic transmission.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Blinkers not working when setting alarm.
Whoever put the alarm in for you did not hook up to the parking lights but the turn signal circuit. Check with whoever put it in or have a mechanic, like one from YourMechanic, come and see if they can...
Oil leak and loss of speed
Hello. There are a couple of reasons why your car would be losing speed and leaking oil. There may be a hole in the oil pan and/or an engine block. I would recommend having a certified technician, such as one...
obd trouble code p0014 , hard up shifting
The code P0014 is for the cam sensor but since you already replaced it, then you will have to have the camshaft end play checked per a technical service bulletin (TSB) to see if it is in excess of specifications....
Oil pressure gauge is reading high
This is not normal. Issues like this should be looked at by a qualified mechanic. This can be caused by many things such as a blocked or clogged oil passage, over filling the oil the last time the oil was...
My car has a rough idle, cuts off sometimes at a complete stop, and hesitates during acceleration
Hi - this could be a problem with the idle control valve, either dirty or failing. Leaking fuel injectors, clogged air filter, or low fuel pressure might also cause the symptoms you have noticed. I would recommend having a certified...
Accelerator goes all the way to the floor but the car won't revive up or move
Hi There, It sounds like you may have a faulty throttle position sensor. The throttle position sensor (https://www.yourmechanic.com/services/throttle-position-sensor-replacement) monitors the throttle position of the throttle plate inside the throttle body in relation to your foot position on the gas pedal....
My power steering pump keeps blowing the filter apart where is the pressure switch is located.
The power steering pump filter is needed to keep the fluid clean to prevent failure to the steering system. The filter is being blown from the pressure control valve is not working properly. I recommend replacing the pressure control valve...
my car displays the battery saver active. What does it mean and what can I do? Thank
Hi there. The Battery Saver Active message can appear on your driver information center (DIC). When the DIC displays this alert, that means that your battery has a low charge, and your vehicle is shutting off certain systems that may...
Oil light flickers when come to stpp. Light or stop sign
Hi there. It's likely that either your engine oil level is low or you have a problem with the oil pressure sensor that is causing this issue. I would start by checking your engine oil level or having the oil...
Related articles
A Buyer’s Guide to the 2011 Mitsubishi Endeavor
The The 2011 Mitsubishi Endeavor is a crossover SUV that manages to provide decent comfort, power and performance into a single package. This also marked the final year of production for the SUV, as it was phased out due to...
The Best Used Cars to Buy for Families
If If it’s time for you to search for the top used cars specifically for families, check out the list we’ve put together of the top five. The list of must-haves Typical items that families are looking for in their...
Understanding the Mitsubishi Routine Maintenance Required and Service Indicator Lights
Car symbols, or dashboard lights, are a car service reminder. Mitsubishi's Routine Maintenance Required lights indicate when your car needs service.
Browse other content
Services
Estimates
Cities